Description

Sinopec Heavy Duty LC Mining Grease is a high temperature extreme pressure (EP) grease formulated with a lithium complex soap thickener and high viscosity mineral base oil, available in NLGI 2. It contains rust and oxidation inhibitors, EP and antiwear additives, as well as 5% of solids including molybdenum disulfide (MoS2 or ‘moly’), which provide additional wear protection especially under the severe vibrating or oscillating conditions that are found in many mining applications.  

Heavy Duty (EP) moly grease #2

5% concentration molybdenum disulfide

High shock loads, extreme conditions 

High temp, dropping point 525°f

 

Appearance: "Normal" Grease
Consistency: Peanut Butter 

Pack Size: 400LB Drum (180KG Volume), Grade: NLGI 2

Features and Benefits

Sinopec Heavy Duty LC Mining Grease is suitable for use in:

• Off-road equipment used in the mining industry, particularly to lubricate slow-moving plain and rolling element bearings under severe conditions of very high loads, shock loading and vibrating or oscillating conditions.
• 5th wheel applications where long life is needed.
• Heavy duty construction, earthmoving, mobile and stationary equipment, especially in those applications operating under very high loads, shock loading and vibrating or oscillating conditions.
• Some heavy duty applications that are difficult to access, and for which long lubrication intervals are required.

Features and Benefits

• Excellent extreme pressure and anti-wear properties protect heavily loaded or shock-loaded bearings and gears from wear, extending equipment life.
• Solids, including molybdenum disulfide, provide an additional measure of residual lubrication and protect metal surfaces against wear in applications where vibrating or oscillating movement tends to squeeze out the grease from between metal surfaces.
• Lithium complex soap thickener ensures a high dropping point, which means that the grease can be used at higher temperatures in severe service applications (operating temperature range is from –10°C to +150°C), and also confers excellent mechanical stability so that the grease structure does not break down in service.
• High base oil viscosity ensures a good oil film thickness is maintained even under severe high-temperature conditions, protecting components against wear.
• Excellent water resistance means that the grease stays in place and is not washed or sprayed off in wet conditions, reducing the need for frequent re-application.
• Excellent protection against rusting and corrosion ensures long component life, and extends maintenance intervals.
• Good thermal and oxidation stability ensure longer grease life under high-temperature conditions, providing optimum lubrication, extending equipment life and reducing maintenance requirements.

Specifications

Sinopec Heavy Duty LC Mining Grease Specifications

NLGI grade	2
Appearance, visual	Black
Thickener type	Lithium
Base fluid type	Mineral
Kinematic viscosity, ASTM D 445 cSt @ 40°C	410
Cone penetration, ASTM D 217 W×60, mm–1	275
Dropping point, °C, ASTM D 566	273
Oil separation, 24 h @ 100°C, %, FTMS 791C-321.3	1
Four ball wear, 60 min @ 392 N, mm, ASTM D 2266	0.45
Four ball EP, maximum non-seizure load PB, N, ASTM D 2596	3924
Timken OK load, N, ASTM D 2509	222
Water washout,1 h @ 38°C, %, ASTM D1264	1
Copper corrosion, T2 copper strip, 24 h @ 100°C, rating, ASTM D 4048	pass

Sinopec Heavy Duty LC Mining Grease meets or exceeds the performance requirements of the following industry specifications:

Cross Reference

• Delo Grease ESI HD
• Mobil XHP Mine
• Shell Gadus S3 V460D
• Chevron Delo Heavy Duty

Additional shipping fees will apply to residential, limited access, deliveries outside the regular delivery network or locations requiring a lift gate to complete delivery.